Over IP Pty. Ltd.
Ph: +61 2 8068 8141 | info@overip.com.au
  

Home > Products > CREMS > CREMS Sensors

CREMS Sensors

Sensors designed for our CREMS or Computer Room Environmental Monitoring Systems with real time reporting, logging and programmable thresholds to meet the requirements of each unique data centre, computer room, remote site application.

This is a picture of a temperature sensor

Part Number:
Description:
Dminensions:

 IP32008
 Temperature Sensor
 3m hard wired cable

Range:
Accuracy:
Temp. Hysteresis:

 0oC–60oC
 ± 5% standard transducer @ 20oC
 Programmable 0.1oC to 9.9oC in 0.1oC
This is a picture of a humidity sensor

Part Number:
Description:
Dminensions:

 IP32009
 Humidity Sensor
 3m hard wired cable

Range:
Accuracy:
Hum. Hysteresis:

 30%-90%
 ± 5% RH @ 25oC
 Programmable 0.1 RH to 9.9% RH in 0.1
This is a picture of a keypad sensor for IP access

Part Number:
Description:
Dminensions:

 IP32012
 IP Keypad
 125mm x 35mm

Keypad:
Power:
Supplied with:

 5x2 matrix type
 From CREMS or similar (hybrid POE)
 2m ribbon cable & 450mm of plastic
 flexible conduit for protection within the
 server rack

This is a picture of a rope water sensor

Part Number:
Description:
Dminensions:
Control Dim.:

 IP32016
 Water Sensor Rope
 5m incriments
 74mmx50mmx27mm

Control Housing:
Control Cable:
Power Supply:
Supply Current:

 Tough ABS plastic
 2m with RJ45 connector
 5v power supply from CREMS & similar
 20mA

This is a picture of water under floor sensor WUF

Part Number:
Description:
Dminensions:

 IP32015
 Spot Water Sensor
 50mm x 50mm

Probes:
Cascade:
Power Supply:
Supply Current:

 Gold plated
 Daisy chain to 3 units
 5 - 12 VDC
 15mA
This is a picture of a smoke sensor

Part Number:
Description:
Dminensions:

 IP32013
 Smoke Sensor
 90mm diammeter

Type:
Addtional Info:

 Contact type
 Test button
 Button/Screw Mount
 2m cable

This is a picture of a air flow sensor for CREMS devices

Part Number:
Description:
Dminensions:
Dielectric Withstang Voltage:

 IP32014
 Air Flow Sensor
 125mm x 35mm
 500 VAC, 50/60Hz, for
 1min. Leakage current is
 1mA, max. (between the
 lead terminals and the
 case)

Range:
Velocity:
Accuracy:
Operating Temp.:
Opertaing Hum.:
Output Signal:
Current:

 0 - 1 m/s or 0 - 4 m/s
 25o, 1 atmosphere
 -10o - 60oC (with no ice or condensation)
 -40 - 80% RH (with no condensation)
Analog 1-5 VDC (non-linear output) load resistance min. 10k Ohm
Max. 15mA (no load, Vcc = 12 to 24 VDC, 25oC)

This is a picture of a door contact switch for intrusion

Part Number:
Description:
Dminensions:

 IP32017
 Door Contact
 40mm x 20mm

Installation:
Supplied with:

 Adhesive or 2 x screw holes
 2m cable with bare wire termination for
 monitoring device
This is a picture of a door contact microswitch sensor

Part Number:
Description:
Dminensions:

 IP32018
 Door Contact Mircoswitch
 100mm x 40mm

Installation:
Supplied with:
Type:

 Simple Installation (no fixings supplied)
 2m cable terminated for direct connect
 Magnetic

This is a picture of a PIR CREMS sensor

Part Number:
Description:
Dminensions:

 IP32019
 PIR Sensor
 90mm x 40mm

Type:
Power Source:
Installation:
Supplied with:

 Contact type
 From CREMS or external power supply
 Simple installation (fixings supplied)
 2m cable terminated for direct connect

This is apicture of a Temperature and Humidity Sensor

Part Number:
Description:
Dminensions:

 IP31009
 Temperature & Humidity
 50mm x 30mm

 Temp. Range:
Hum. Range:
Power Status:
Dry Contacts:
Connect:

 0oC–80oC with + 1oC accuracy
 10% – 90% RH with (+-3% accuracy)
 LED Indicator
 2 x normally open/normally closed
 RJ45 port for catx cable to 90m length
This is a picture of a flashing beacon for CREMS

Part Number:
Description:
Dminensions:

 IP32020
 Flashing Beacon
 75mm diammeter

Light:
Colurs:
Power Supply:
Supplied with:

 Flashing
 Blue & Red
 From CREMS or external power supply
 2m cable
This is a picture of a flashing beacond with siren for CREMS

Part Number:
Description:
Dminensions:

 IP32021
 Flashing Beacon & Siren
 75mm diammeter

Light:
Alerts:
Control:
Colurs:
Power Supply:
Supplied with:

 Flashing
 Config. alert sounds - switch settings
 Volume control
 Blue & red
 From CREMS or external power supply
 2m cable

 

© Copyright 2008 All Rights Reserved OverIP Group Pty. Ltd. | Home | Products | Site Map | Contact Us | Privacy Policy |