Over IP Pty. Ltd.
Ph: +61 2 8068 8141 | info@overip.com.au
  

Home > Products > CREMS > 12 Port CREMS Monitoring Device

CREMS 12 Port Monitoring Device

This is a picture of a 12 port CREMS
  • Web enabled HTTP/HTTPS
  • 12 x Digital Inputs (Modular)
  • 4 x Digital Outputs
  • 2 x Access Control Ports
  • 1 x LCD Port for viewing alarm notifications



The primary aim of the UTH-2 CREMS Device is to produce a cost effective monitoring and control solution across either a computer room environment or 3 server racks for power, environmental and physical access control parameters using a single IP address, to allow users to monitor and control external devices via a network attached unit.

 

  1. SNMP agent specifically aimed and optimised for rack management, where all I/O and control functions may be monitored and controlled through the SNMP protocol
  2.  

  3. Ideal for modular computer room environment monitoring or per 3 server rack cabinet installations
  4.  

  5. Supports up to 6 intelligent PDUs (Power Distribution Units) / HE-Amp channels
  6.  

  7. 12 sensors ports
  8.  

  9. 2 output relays ports
  10.  

  11. 2 access control channel ports
  12.  

  13. Supplied as a 1U, 19” rack mountable unit
  14.  

  15. Designed to conform to the relevant CE and UL, FCC certification standards

Web Browser Screen Shot of Digital Inputs

This is a picture of digital inputs on a web browser

Web Browser Screen Shot of PDU Control

This is a picture of PDU control via a web browser

Parameters

UTH-2 Features

Internal PSU

Single

Supports HE-Amp

This is a picture of a green tick

Supporting no. of PDUs (Monitoring volts, amps, kVA, kWHr, PF & Hz)

6

Internal Relays

4

Internal Inputs (Temperature/Humidity/Contact)

12

Internal Access Keypad

2

Internal Access Serial Smart Card, e.g. HID

2

Physical Dimensions in mm (H x W x D)

43mm x 483mm x 134mm

Boolean Logic

This is a picture of a green tick

NAND Flash Filing System (for Events Audit Log)

This is a picture of a green tick

Web Interface

This is a picture of a green tick

SNMP Support

This is a picture of a green tick

Email Alarms

This is a picture of a green tick

Syslog

This is a picture of a green tick

TFTP Upgradeable Firmware

This is a picture of a green tick

LDAP Support

This is a picture of a green tick

Real Time Clock

This is a picture of a green tick

SNTP (Time Protocol)

This is a picture of a green tick
Input Power 100 - 240V AC
Input Connector IEC C14 Input
Power Consumption Max 40W
Additional Information Isolated Suppaly and Chassis Ground
Power Supply Options 48V DC Power Input
Operating Temperature 0°C to 45°C, -15°C to 50°C
(Optional extended range)
Storage Temperature -10°C to 70°C, -40°C to 70°C
(Optional Extended Range)
Operating Humidity 15% to 85% RH
Storage Humidity 5% to 90% RH
MTBF > 100,000 Hrs
Temperature Range
0°C to 60°C
Temperature Monitoring Accuracy
± 5% Standard Transducer @ 20°C
Temperature Hystersis
Programmable 0.1°C to 9.9°C in 0.1
increments
Humidity Monitoring Range
30% to 90% Relative Humidity
Humidity Monitoring Range ± 5% RH @ 25°C
Humidity Hystersis
Programmable 0.1%RH - 9.9% in 0.1 increments RH Analogue Resolution
Analogue Resolution 12 Bit A/D
Additional Information
Inputs are not isolated. Auto
detection of supported sensors
Power Parameters Monitored
 Volts, Amps, total kVA, total kWh,
total Power Factor and Frequency
Voltage Monitoring Range 0 V to 500 V
Voltage Monitoring Accuracy
± 2%
kWh Monitoring Range 0 kWh to 429496729 kWh
kVA Monitoring Range 0 kWh to 429496729 kVA
Current Monitoring Range 0 A to 65 A
Current Monitoring Accuracy
± 2%
Output Connectors WeidMuller
Output Modes Normally Open, Normally Closed
Maximum Switching
 48 V at 1 A (Resistive load)
Additional Information Outputs 1 and 2 offer a 12+ V DC
supply fused at 1amp

 

The UTH-2 CREMS is a network attached device, which may be controlled and monitored over a TCP/ IP 10/100Mbps Ethernet network through SNMP, HTTP, HTTPS, and is capable of monitoring sensors and controlling ppower distribution units (PDUs) and output relays, allowing other network attached devices to interrogate and send commands to the UTH-2.

To achieve flexibility with a focus on security, ease of use and increased monitoring support, the UTH-32 CREMS supports a maximum of four monitor and control power strips, supporting RS232 serial port communication protocol, which will monitor volts, amps, kVA, kWHr, power factor and frequency from the power strip.

Further to this, the UTH-2 also supports two serial keypads, or smart card readers, to control access to the cabinets via solenoid or motorised activated door locks, one external LCD display unit and six sensor inputs, which may be any combination of temperature, humidity, voltage free contact sensor and 0-10VDC analogue input voltage.

The UTH-2 also supports an intuitive web based graphical user interface, eliminating the need for complex serial setup processes. The web server within the unit supports HTTP/HTTPS network protocols, allowing the user to securely configure,
monitor and control the UTH-2 via a username and password access control system.

© Copyright 2008 All Rights Reserved OverIP Group Pty. Ltd. | Home | Products | Site Map | Contact Us | Privacy Policy |